Youlean Freq-Balancer v2.0 (32bit Win)

VST Plugins / Audio Soft 1-09-2015
Youlean Freq-Balancer v2.0 (32bit Win)
What this plugin does:

Freq-Balancer analyzes the frequency content of an audio signal and automatically applies an equalizer that evens out the frequency balance towards a curve found on many commercial tracks. When Freq-Balancer analyses audio, it measures the audios frequency content over a period of time. It splits the incoming audio signal into 7 frequency bands. Then it measures and compares the audio levels within each band. Finally it applies EQ to compensate for any uneven frequency balance.

Typical applications:
The Freq-Balancer is mainly designed for mastering, but it can be used when mixing down songs, as well on the separate tracks. It can be used for analyze purposes only, or for both analyzes and correction. It can be helpful if you don't have high quality studio monitors, or if your room has no acoustic treatment, and the tracks you produce tend to have uneven frequency response.

Tips for mastering:
For best detection you must find the loudest and busiest part in the mix and then click "Learn”. Try to avoid esses in vocals as it can make the result of analysis less accurate. To avoid it, you can loop part of the audio that doesn't contain esses. You will achieve best results if you insert this plugin after a compressor or limiter and then add the final master limiter after it, because too much dynamics could produce high spikes in some frequencies which will affect analysis. In most cases default settings will work well.

Before you do anything with the plugin, it is highly recommended to read the manual by clicking on the "Help" button.

home page:

youlean.ucoz.com/index/freq_balancer/0-6
Related articles
Stereo Tool 7.72 + Plugin for Winamp Stereo Tool 7.72 + Plugin for Winamp
Soft / Audio Soft 27-08-2015
Stereo Tool is a Winamp plugin that delivers professional quality audio processing. Have you ever wondered why on the radio all songs have the same volume, while if you play CDs or MP3s, the volume and the type of sound changes all the time? That's because the big commercial radio stations use expensive equipment that ensures that all songs sound the same, and that they sound good on a wide range of cheap up to expensive audio systems. Now Stereo Tool offers you similar processing, which you can use while listening to your own music.
Many people have reported that the processed audio sounds better on their equipment than the original unprocessed audio. Besides this, Stereo Tool offers a stereo widener which makes music sound 'fuller' and more 'spacial' (less is also possible), and it can repair phase shift problems in recordings (cheap CDs, vinyl, tapes).

Features:
В» Stereo enhancement
В» Dual-band pre-limiter
В» 10-bands compressor/limiter
В» 10-bands clipper
В» 10-bands equalizer
В» 4 level output limiter
В» Extra loudness
В» Output low- and highpass filter
В» FM pre-emphasis
В» FM stereo encoding
В» FM RDS encoding
В» Change settings from ext. scripts

OS : Windows 8/7/Vista/XP
Language : Multilingual
Acustica Audio Ochre EQ v1.3.965 WIN/MAC Acustica Audio Ochre EQ v1.3.965 WIN/MAC
Soft / Audio Soft 27-08-2015
Acustica is pleased to introduce Ochre "HOMEBREW" Eq, an EQ with 3 parametric bands, individually switchable. It’s the first plug-in of the HOMEBREW series, a new series of Acqua plug-ins with gorgeous graphical user interfaces that enable easy and quick parameter changes.

* Output slider control plug-in output gain.
* The PRE-IN button enables (lamp ON) or bypasses (lamp OFF) the preamp stage of Ochre q.
POWER button sets to bypass the plug-in or not-bypasses
* Input Trim: This knob sets the input level from -24dB to +24dB, and is used to control the signal level inside the eq, the output level is than automatically compensated by the same amount of gain. 
* At the first execution of the plug-in, input is set to ensure that you feed an appropriate level from the first stage of your signal path to the final one.
INPUT – OUTPUT VU METER measure the input (uppest position meter) and output (lowest position meter) levels of the plug-in.
* Each band is controlled independently by an identical set of controls; for Low Frequency ,Mid Frequency, High Frequency, each section has controls for:

Q: from 0.5 to 4
Frequency: Low band from 35 to 315 Hz;
Mid band from 315 to 2500 Hz;
High band from 2500 to 22000 Hz
Cut/Boost: +/-16dB;
Mcs Software Library Wave Restoration v2.0 English-peace-out Mcs Software Library Wave Restoration v2.0 English-peace-out
Soft / Audio Soft 27-08-2015
WAVE RESTORATION changes a dull sound into a good sound.

Most of minor CD of the live performance are a dull sound.
The cause that becomes a dull sound happens with that a part of the
wave of a sound loses.
WAVE RESRORATION does not add high frequency harmonics to dull sounds.
Also, a wave is not being restored with the equalizer.

WAVE RESTORATION restores wave by the new method.
The new technology called AIfilter of our company development is
being used, to the restoration of a wave.

1.Unzip and install.

2.Input Serial Code.

Serial Code : 4765
Blue Cat Audio MB-7 Mixer v2.51 AU OSX-Kleen Blue Cat Audio MB-7 Mixer v2.51 AU OSX-Kleen
Blue Cat's MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix them as if they were separate tracks.


Each band proposes controls that you can find on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the "stereoness" and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility.

The plug-in can also operate as a multiband VST and Audio Unit host: you can process each band 
independently with your favorite VST or Audio Unit plug-ins! Up to four plug-ins can be loaded on 
each band, pre or post fader. Latency compensation, presets management, undo/redo integration, 
and individual plug-in bypass are included for optimal operation.

Changes in Blue Cat’s MB-7 Mixer v2.51

- Last loaded preset can now be quickly saved from the presets menu without having to select the file.
- VST: fixed latency compensation reporting in Cubase (no need to re-enable the plug-in to update the latency anymore).
- AAX and RTAS: fixed a feedback loop that could occur in bypass mode when the plug-in was inserted before another one.

home page:
http://www.bluecataudio.com/Products/Product_MB7Mixer/
DMG Audio EQuick v1.10 Ked MAC OSX-Kleen DMG Audio EQuick v1.10 Ked MAC OSX-Kleen
EQuick is a streamlined, ultramodern EQ built to help you make your mixes magnificent. Fast, intuitive and unbelievably flexible, we've packed it with digital functionality.

Overview

Unbelievably low CPU usage for high instance counts.
Generates super-high-quality prototypes. Clear undistorted top.
Linear phase mode for mastering and special channels
32 bands of EQ, Q 0.1->50, +/-36dB range
Each band can be Peak, HPF, LPF, High Shelf, Low Shelf or Notch
Each bank can process Mid, Side or the full stereo image
Fully parametric filters (high and low-pass), 6/12/18/24/30/36/42/48db/oct
Five different UI sizes.
M/S processing per-band with listen.
Windows VST and VST3 as 32+64bit, RTAS 32bit.
Mac VST, VST3 and AU as 32+64bit, RTAS 32bit. 


Sound

Bells and notches, with a +/-36dB range, and a Q range from 0.1 to 50.
Shelves which let you move the resonance above or below the curve.
Filters at 6/12/18/24/30/36/42/48 db/octave, sweepable resonance.
Adjustable gain-q interaction for 'musical' usage.

Vision

Beautiful, clutter-free modern interface.
Big, clear, antialiased graph
Hi-res Spectrum analyser
Range, to scale the EQ response, both +ve and -ve.
Frequency shift, to allow you to retune the response
Large, configurable spectrum-analyser with readout
Control linking to move sets of bands together.
Configurable VU, with variable ballistics
8 banks of A/B
Full preset management system
Undo/redo
Autolisten mode, for quick finding/adjustment of frequencies

1.06->1.07
Fix bug affecting reloading of settings
Fix issues with Windows 32bit AAX and ProTools 10

Changelog v1.10:

- Fix bug with AAX automation whereby discrete parameters could jump.
- Fix bug with mousewheel on windows to left of main screen on windows.
- Improve determinism of automation when rendering.
- Improve handling of OS load dialog for presets.
- Improvements for latency reporting both realtime and offline.
DMG Audio EQuality v1.27 AU VST Ked OSX-Kleen DMG Audio EQuality v1.27 AU VST Ked OSX-Kleen
The Final Go-To EQ

EQuality has been designed to be the perfect EQ to let your mixdowns shine. Something for every 
track of your session. For it to sound at least as good as any high-end console or rack gear, and 
with all the features and functionality that digital brings.

This is the best mix EQ ever built, but don’t take our word for it - test the claim

Overview

Very low CPU usage for every track of your mix
Generates super-high-quality prototypes. Clear undistorted top.
Digital+ mode; turns awesome into perfect.
Linear/Analogue/Minimum phase modes for master and special channels
6 bands, 2 shelf/bells, 4 bell/notches, Q 0.1->50, +/-36dB range
2 fully parametric filters (high and low-pass), 6/12/18/24/30/36db/oct Q 0.1->20
Three different UI modes to taste - full, graph and knobs.
M/S processing modes

Sound

Bells and notches, with a +/-36dB range, and a Q range from 0.1 to 50.
Shelves which let you move the resonance above or below the curve.
Filters at 6/12/18/24/30/36/42/48 db/octave, sweepable resonance.
Extra hi-pass, so you can remove rumble on every channel without spending a band on it.
M/S processing mode, allows you to process Mid, Side or the Stereo image.
Adjustable gain-q interaction for 'musical' usage.


Vision

Big, clear, antialiased graph
Hi-res Spectrum analyser
Range, to scale the EQ response, both +ve and -ve.
Frequency shift, to allow you to retune the response
Large, configurable spectrum-analyser with readout
Control linking for all EQ parameters
Configurable VU, supporting K-metering and variable ballistics
8 banks of A/B
Full preset management system
Undo/redo